Gets or sets the number of times an ICAO has to be seen in a Mode-S message (regardless of whether it carries PI) before it will be accepted. 0 disables the feature.

Gets or sets the number of milliseconds over which AcceptIcaoInNonPICount will be measured.

Gets or sets the number of times an ICAO has to be seen in a Mode-S message that carries PI, and where PI = 0, before it will be accepted.

Gets or sets the number of milliseconds over which AcceptIcaoInPI0Count will be measured.

Gets or sets the number of milliseconds that an odd/even pair of CPR coordinates must be received within to be usable for a global decode of airborne position.

Gets or sets the number of milliseconds that an odd/even pair of CPR coordinates must be received within to be usable for a global decode of surface position of a vehicle travelling faster than 25 knots.

Gets or sets the number of milliseconds that an odd/even pair of CPR coordinates must be received within to be usable for a global decode of surface position of a vehicle travelling at or below 25 knots.

Gets or sets a value indicating that ICAOs that are not in a recognised code block are to be ignored for messages that do not have parity.

Gets or sets a value indicating that ICAOs that are not in a recognised code block are to be ignored for messages that have parity.

Gets or sets a value indicating that military extended squitter messages are to be ignored.

Gets or sets the number of kilometres over 30 seconds that an airborne vehicle can travel before a local decode is deemed to be inaccurate.

Gets or sets the number of kilometres / 30 seconds that a vehicle on the ground can travel before a local decode is deemed to be inaccurate.

Gets or sets the number of kilometres / 30 seconds that a vehicle tranisitioning between airborne and surface positions can travel before a local decode is deemed to be inaccurate.

Gets or sets the location of the receiver.

Gets or sets the maximum range of the receiver in kilometres.

Gets or sets the statistics to update when translating messages.

Gets or sets a value indicating that callsigns are not to be used if they came from what appeared to be a Mode-S BDS2,0 message.

Gets or sets a value indicating that decoded locations that are further away than the receiver can see are still allowed through, disabling part of the ICAO reasonableness tests.

Gets or sets a value indicating whether TIS-B messages should be ignored.

Gets or sets the number of seconds before aircraft that are no longer being received are forgotten about.

Gets or sets a value indicating that local decoding should be used to determine the initial position of an aircraft instead of global decoding of an odd / even frame.