Initializes a new instance of the AircraftJson class

Gets or sets the aircraft's air pressure setting in inches of mercury.

Gets or sets the aircraft's pressure altitude in feet.

Gets or sets the type of altitude transmitted by the aircraft.

Gets or sets the bearing from the browser to the aircraft in degrees from 0° north.

Gets or sets the aircraft's callsign.

Gets or sets a value indicating that the Callsign came from an unreliable source.

Gets or sets the construction / serial number of the aircraft.

Gets or sets the number of messages received for the aircraft.

Gets or sets the airport that the aircraft is travelling to.

Gets or sets the distance from the browser's location to the aircraft in kilometres.

Gets or sets a flag indicating that the aircraft is transmitting a mayday squawk.

Gets or sets a value indicating the placement of the engines mounted to the aircraft (see EnginePlacement).

Gets or sets a value indicating the type of engines that the aircraft uses (see EngineType).

Gets or sets the date and time (UTC) that a transmission from the aircraft was first received by the server.

Gets or sets a value indicating how many flights this aircraft has logged in the BaseStation database.

Gets or sets a list of coordinates representing the full trail for the aircraft. If ResetTrail is true then it is the entire trail, otherwise it extends the existing trail.

Gets or sets the aircraft's geometric altitude in feet.

Gets or sets the ground speed of the aircraft in knots.

Gets or sets a value indicating that the server can supply a picture of the aircraft.

Gets or sets a value indicating whether the receiver emitted a signal level for the aircraft.

Gets or sets the 24-bit Mode-S identifier of the aircraft.

Gets or sets the country that the aircraft's Icao24 was allocated to.

Gets or sets a value indicating that the Icao24 code is wrong - either it is an unallocated code or the aircraft is known to be transmitting the wrong code.

Gets or sets a value indicating that the aircraft is flagged as interesting in the BaseStation database.

Gets or sets a value indicating that the aircraft is operated by a country's military.

Gets or sets a value indicating that the aircraft was seen on a SatCom feed.

Gets or sets a value indicating that the last message received for this aircraft was from a TIS-B source.

Gets or sets the latitude of the aircraft.

Gets or sets the aircraft's longitude.

Gets or sets the manufacturer's name.

Gets or sets the English description of the aircraft model. Usually includes the manufacturer.

Gets or sets the number of engines that the aircraft has - note that this is a copy of the ICAO8643 engine count which is not always a number!

Gets or sets a value indicating that the aircraft is on the ground.

Gets or sets the operator's name.

Gets or sets the operator's ICAO code.

Gets or sets the airport that the aircraft set out from.

Gets or sets the height of the aircraft picture in pixels.

Gets or sets the width of the aircraft picture in pixels.

Gets or sets a value indicating that the Latitude and Longitude were calculated by an MLAT source.

Gets or sets a value indicating whether the position is older than the display timeout.

Gets or sets the time that the Latitude and Longitude were transmitted as a number of .NET ticks.

Gets or sets the ID of the receiver that is currently tracking the aircraft.

Gets or sets the aircraft's registration.

Gets or sets a value indicating that the server wants all trails for the aircraft to be reset.

Gets or sets the number of seconds that the aircraft has been tracked for.

Gets or sets a list of coordinates representing the short trail for the aircraft. If ResetTrail is true then it is the entire trail, otherwise it extends the existing trail.

Gets or sets the signal level of the last message received for the aircraft. Use in conjunction with HasSignalLevel.

Gets or sets a value indicating the species of aircraft (see Species).

Gets or sets a value indicating the type of speed the aircraft is transmitting.

Gets or sets the squawk currently transmitted by the aircraft.

Gets or sets a list of airports that the aircraft will be stopping at on its way to Destination.

Gets or sets the altitude set on the autopilot / FMS etc.

Gets or sets the heading on the aircraft's autopilot or FMS.

Gets or sets the heading that the aircraft is tracking across the ground in degrees from 0° north.

Gets or sets a value indicating that the track is the aircraft's heading, not its ground track.

Gets or sets the trail type. It is empty for plain trails (just position), 'a' for trails that have altitude attached and 's' for trails with speeds attached.

Gets or sets the transponder type.

Gets or sets the ICAO8643 type code of the aircraft.

Gets or sets the unique identifier of the aircraft.

Gets or sets the user tag from the aircraft's database record.

Gets or sets the vertical speed in feet per second.

Gets or sets the type of altitude reported in VerticalRate.

Gets or sets a value indicating the wake turbulence category of the aircraft (see WakeTurbulenceCategory).

Gets or sets the year the aircraft was manufactured.

Determines whether the specified Object is equal to the current Object.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

Serves as a hash function for a particular type.

Gets the Type of the current instance.

Creates a shallow copy of the current Object.

Returns a string that represents the current object.